News

Measuring the thickness of 316L stainless steel coils is an important step to ensure their quality and compliance with standard specifications. The following are several commonly used thickness measurement methods: 1. Ultrasonic thickness gauge measurement Principle: Ultrasonic thickness gauges use the propagation time of ultrasonic signals to measure the thickness of materials. Ultrasonic waves are transmitted to the material from one side, and are returned to the sensor through reflection. The thickness of the material is calculated based on the propagation time.

Wound steel strip is a material commonly used to reinforce and enhance structures, especially in pressure vessels, pipelines, mechanical equipment and other fields. Its structural characteristics are mainly reflected in the following aspects: 1. High-strength steel strip material Steel strip material: Wound steel strips usually use high-strength steel wire or steel strip materials, which have excellent tensile strength, corrosion resistance and wear resistance. Common steel materials include carbon steel, stainless steel, etc., which can be selected according to different application requirements.

The effect of heat deformation on stainless steel sheet depends on several factors, including the type of stainless steel, the degree of temperature change, the heating rate, the thickness of the sheet, the heating time, and the mechanical stress it is subjected to. Here are some key factors:

Plastic spraying on stainless steel is a surface treatment technology that improves the aesthetics, corrosion resistance and wear resistance of stainless steel by spraying a plastic coating on the surface of stainless steel. The specific steps of plastic spraying are as follows: 1. Surface cleaning and pretreatment Before plastic spraying, the surface of the stainless steel plate must be thoroughly cleaned and pretreated to ensure good adhesion of the coating to the metal surface.

430 stainless steel is a common ferritic stainless steel with good corrosion resistance and high thermal stability. It is widely used in home appliances, automobiles, construction, kitchenware and other fields. Its chemical composition mainly includes about 16-18% chromium (Cr) and low carbon content, so it does not have good welding performance and plasticity, but its processing performance is good, hardness is high and wear resistance is strong.

The measures to prevent stainless steel dowel pins from falling off can be taken from the following aspects: Choose the appropriate size and matching accuracy: Ensure that the matching accuracy of the pin diameter and the hole diameter is appropriate. Too large or too small will affect its fixation. Too loose matching can easily cause the pin to fall off, while too tight matching may make it difficult to install the pin.