Industry News

Stainless steel sheet sandblasting process is a commonly used surface treatment method. By spraying abrasives onto the surface of stainless steel at high speed, it can achieve the effects of removing oxides, cleaning surface impurities, improving surface roughness, and increasing surface adhesion. This process is widely used in decorative processing, cleaning processing, surface polishing and other fields of stainless steel.

Although stainless steel foil rolls and stainless steel foil strips are both forms of stainless steel materials, they differ in shape, processing methods, and application areas. Here are the main differences between them:

To prevent pitting of stainless steel plates, it is mainly through improving the use environment of stainless steel, surface treatment and selecting appropriate materials to enhance its corrosion resistance. Here are some specific preventive measures: 1. Choose the right stainless steel material Choose a stainless steel grade with high corrosion resistance: For example, 316 stainless steel performs better than 304 stainless steel in terms of chloride corrosion resistance. For environments with strong corrosion resistance, materials with strong chloride corrosion resistance should be selected.

Measuring the thickness of 316L stainless steel coils is an important step to ensure their quality and compliance with standard specifications. The following are several commonly used thickness measurement methods: 1. Ultrasonic thickness gauge measurement Principle: Ultrasonic thickness gauges use the propagation time of ultrasonic signals to measure the thickness of materials. Ultrasonic waves are transmitted to the material from one side, and are returned to the sensor through reflection. The thickness of the material is calculated based on the propagation time.

Wound steel strip is a material commonly used to reinforce and enhance structures, especially in pressure vessels, pipelines, mechanical equipment and other fields. Its structural characteristics are mainly reflected in the following aspects: 1. High-strength steel strip material Steel strip material: Wound steel strips usually use high-strength steel wire or steel strip materials, which have excellent tensile strength, corrosion resistance and wear resistance. Common steel materials include carbon steel, stainless steel, etc., which can be selected according to different application requirements.

The effect of heat deformation on stainless steel sheet depends on several factors, including the type of stainless steel, the degree of temperature change, the heating rate, the thickness of the sheet, the heating time, and the mechanical stress it is subjected to. Here are some key factors: